Gyroscopes

[ Follow Ups ] [ Post Followup ] [ Bessler Discussion Board ] [ FAQ ] [ Back to BesslerWheel.com ]

Posted by Terrence Lee (63.231.162.188) on January 26, 2003 at 15:23:10:

Working on a new wheel using gyro's. Lots of wierd stuff they do. On a wheel with two opposing axis at (9:00 and 3:00), put a gyro on the right side of the left axis and one on the right side of the right axis. They will maintain their orientation thoughout the spin of the wheel. Just need a drive from the axis to keep the gyros going. They require very little energy to keep their revs up. Need a right angle power transfer with a somewhat high gearing(sort of like the rear end and transmission in a car ,only in miniature). Any ideas for the gyro drive other than making one from scratch?

Terry

Follow Ups:

Re: Gyroscopes Terry 16:37:30 01/31/03 (0)
Re: Gyroscopes BobP 05:28:19 01/30/03 (1)
Re: Gyroscopes BobP 03:38:14 01/29/03 (0)
Re: Gyroscopes Terry 10:46:28 01/28/03 (1)
Re: Gyroscopes Bob Parrott's image attachment 01:05:03 01/28/03 (2)
Re: Gyroscopes BobP 12:46:10 01/27/03 (0)
Re: Gyroscopes mike 23:51:18 01/26/03 (0)
Re: Gyroscopes Vector Viper 19:13:46 01/26/03 (1)

Post a Followup

Name:
E-Mail:
Subject:
Comments:	: Working on a new wheel using gyro's. Lots of wierd stuff they do. On a wheel with two opposing axis at (9:00 and 3:00), put a gyro on the right side of the left axis and one on the right side of the right axis. They will maintain their orientation thoughout the spin of the wheel. Just need a drive from the axis to keep the gyros going. They require very little energy to keep their revs up. Need a right angle power transfer with a somewhat high gearing(sort of like the rear end and transmission in a car ,only in miniature). Any ideas for the gyro drive other than making one from scratch? : Terry
(Archived Message)