:
Posted by Vecto Viper (205.162.15.2) on July 11, 2003 at 01:33:45:
In Reply to: Re: Some Material posted by Scott Ellis on July 10, 2003 at 21:36:32:
: Here is a picture that Michael sent me. Thanks Michael and good luck!
:
:
: : I am uploading a photo that shows approx. 1/3 of the parts, to Scott today. It won't reveil how anything works however. Just to let you know, most-not all but most of the parts are fabricated from oak. I'll be spending today and tomorrow assembling a section of this machine to make sure all the parts align properly, and then going from there. Time is somewhat delayed from what I had wanted, but then life intercedes, and as anyone who has built something will tell you, things take time. I'm also doing all of this out of a small one bedroom apartement.
Try not to wake the neighbours, OK? :*)
Seriously, those are some nicely machined parts there...
Viper
: : Best regards,
: : Michael