Some Material

[ Follow Ups ] [ Post Followup ] [ Bessler Discussion Board ] [ FAQ ] [ Back to BesslerWheel.com ]

Posted by Michael (199.60.107.1) on July 10, 2003 at 12:57:40:

I am uploading a photo that shows approx. 1/3 of the parts, to Scott today. It won't reveil how anything works however. Just to let you know, most-not all but most of the parts are fabricated from oak. I'll be spending today and tomorrow assembling a section of this machine to make sure all the parts align properly, and then going from there. Time is somewhat delayed from what I had wanted, but then life intercedes, and as anyone who has built something will tell you, things take time. I'm also doing all of this out of a small one bedroom apartement.

Best regards,

Michael

Follow Ups:

Re: Some Material Scott Ellis 21:36:32 07/10/03 (2)
- Re: Some Material Michael 12:43:11 07/11/03 (0)
- Re: Some Material Vecto Viper 01:33:45 07/11/03 (1)

Post a Followup

Name:
E-Mail:
Subject:
Comments:	: I am uploading a photo that shows approx. 1/3 of the parts, to Scott today. It won't reveil how anything works however. Just to let you know, most-not all but most of the parts are fabricated from oak. I'll be spending today and tomorrow assembling a section of this machine to make sure all the parts align properly, and then going from there. Time is somewhat delayed from what I had wanted, but then life intercedes, and as anyone who has built something will tell you, things take time. I'm also doing all of this out of a small one bedroom apartement. : Best regards, : Michael
Optional Link URL:
(Archived Message)